Delivering net zero carbon buildings with design for manufacture and assembly (DfMA)

If the filter is.

One of the easiest ways to clean ground in dirt is with a mixture of washing up liquid and water.. You don’t need much washing up liquid for this.A quarter teaspoon of washing up liquid added to around 250ml of plain water is plenty.

You should also give the floor a quick vacuum before you start to get rid of loose dirt.. Once you’ve made the solution, add a small amount to a clean, white cloth and start using it to gently work the affected carpet fibres.Start from the outside and work inwards to prevent the stain from spreading further.We don’t recommend spraying the mixture on the carpet directly, as you don’t want to oversaturate it..

When you’ve covered the whole area, let the washing up liquid sit in the carpet for 3-5 minutes, before blotting it up with a different dry cloth (make sure it’s white).Always blot a carpet rather than rub to prevent damage.. To get rid of any remaining solution and dirt, give the area a rinse with cold water and blot it dry again with a different cloth.

Then allow the area to fully air dry before covering it..

Finally, when the patch of carpet is completely dry, give it another vacuum..It’s best to blot as much tea from your carpet as possible before using your cleaning solution..

Try not to scrub or wipe the area.Instead of lifting the stain, scrubbing can cause it to sink deeper into your carpet’s fibres.

It’s best to pat or blot the area with a clean cloth gently..Always test your cleaning solution.